Massey Ferguson Tractors 1125 - 1140 - 1145 - 1240 - 1250 - 1260 series :

The purpose of this manual is to provide the owner and user of MF 1125 - 1140 - 1145 - 1240 - 1250 - 1260 tractors with clear instructions on how to split the tractor parts. It is designed for use by the workshop head since it does not give details about the disassembly, re-assembly and adjustment operations for all the assemblies, but just for those that require particular knowledge or recommendations.
Before reading the manual, it is essential to read sect.3: WORKING IN SAFETY in order to prevent errors or mistakes that could jeopardize the safety of the technicians in the workshop.
The information in this manual was up to date at the time of publication. Massey Ferguson reserves the right to make modifications without being obliged to give notice.
Please contact your area dealer or the importer if discrepancies are discovered or for any other requirement.
1.2 Structure of the manual
The manual is divided into chapters (chap.) and each chapter into sections (sect.). Page numbering begins with 1 for each chapter with the number of the chapter itself alongside.
Example: 5-7 indicates page 7 of chapter 5. Numbering of the figures also begins with 1 in each
chapter with the chapter number alongside.
Example: Fig. 73-5, indicates figure 73 of chapter 5.
The tools required for all the disassembly, re-assembly and adjustment operations are listed at the
end of each chapter or important section. Not all the tools listed at the end of the chapter or section are, however, mentioned in the text, just those considered
essential for correct disassembly, re-assembly and adjustment of the assembly in question.
The constructional drawings of all the tools described in the various chapters or sections are listed in chapter 12 to allow the dealer to provide his workshop with
all those considered of importance.